05 July, 2014

Tool Box Project: Measured Drawing and Materials List




















Above is the measured drawing for the tool box project I have going on over at my Vimeo page which can be found here.  I don't have any CAD software nor do I have the desire to acquire some.  This drawing was done the old fashioned way, on a drafting board with pencil and paper.  Don't be critical as I only have a junior high drafting class to draw from.  That class was in the mid '80s so I, obviously, don't remember very much.  This drawing is not to scale, but it's close enough for what you need to know.  I am able to read the measurements just fine on my computer but if you are having a hard time seeing them, here are some general tips that should be fairly common to most browsers.  Right click the image and select "view image" from the pop-up menu which should display only the drawing.  Another tip is to press and hold the CTRL key then tap the + key to zoom in.  CTRL and - will zoom out.  Last tip is to save the image to  your computer and use the image viewing program of your choice.  I left out unnecessary things such as the hinges, handle, latches and the sledge feet.  Those details can be seen in the videos.

Some notes.  The tool box from the Woodwright's Shop is only 7" in depth and the front and back panels are 1/2" thick.  I changed some dimensions so as to not violate any copyrights.  The tool box we're building is considerably deeper and is made from 3/4" thick stock, which makes it quite heavy.  You may want to make a mock-up out of cardboard to get an idea of the finished size.  If you would like a less deep tool box simply purchase a 1"x8" or 1"x6" board instead of the 1"x10" called for in the materials list.  If you can find 1/2" thick stock for the front and back panels, go that route.  Stick with pine.  You may use hardwood if you wish, but it will add unnecessary weight to an already heavy tool box.  The box stores in my area don't sell 1/2" thick material in large enough pieces that can be used for this toolbox.  Obviously, if you have the tools and skills to thickness your own stock that is your choice.  The goal of this project is to show new woodworkers what can be made with a small kit of tools and "off the rack" materials.  I haven't built the tray which will fit inside the tool box as I haven't made up my mind how to go about it.  I have a few ideas but need to try them out before releasing a video of it. I am not including materials for the tray in the materials list.

Permissions.  You may use the above drawing for non-commercial (i.e. you don't make these toolboxes for sale or sell the drawing) uses.  School shops, non-profit organizations, woodworking forums, Cub Scouts, Boy Scouts, Girl Scouts etc. may replicate my drawing as much as they wish.  I simply ask that you do not profit from it and that credit is given to me.  It's a simple drawing but it took some time and effort to create it.  I also ask that a link to this blog post, or a print of this post, is made available with the drawing (I want people to see the additional notes I have written above). 

Materials List
  • 1 - 1"x12"x8' board (nominal)
  • 1 - 1"x10"x8' board (nominal)
  • Wood glue
  • 1- box 6d common nails (about 1 1/4" long.  Don't get finish nails, you need something with a head on it)
  • 2 - non-removable pin butt hinges (don't get hinges that are too small or too large)
  • 1 - metal handle
  • 2 - catches to hold the lid shut
  • 2 - 1/4"x 1 1/4" carriage bolts (to attach the handle.  Adjust bolt length to your handle)
  • 2 - 1/4" nuts (use lock nuts if you prefer them.  I dislike lock nuts)
  • Paint, polyurethane, lacquer, shellac or other finish of your choice.
  • 220 grit sandpaper. 

No comments: